1pc Single Compact Flash CF to 3.5 IDE 40Pin Male adapter Card RH-wi

Description

Description:
-Brand New.
-40-pin standard IDE connector
- CF card is essentially an ATA mode of portable solid-state electronic disk. It is characterized by small size, large capacity, intelligence, wide temperature and hot plug-in. CF-IDE adapter adapter specially designed for industrial use is designed and developed with four-layer board structure, which is convenient and flexible to use. The CF card holder designed by us can meet the need of using CF card in your industry. You can use it to extend CF card on IDE interface.
- Comparing with DOM and DOC, CF card has hot-swap function. Other performances are basically the same as DOM/DOC. There is no difference between the memory chips used or the optimized storage algorithm. Therefore, the lifetime is basically the same. It is widely used in industrial control in Europe and America.
-CF card belongs to the accessory of notebook computer. It has high output and low cost.
- CF card is suitable for repeated erasing. It can store both program code and data rewritten in large quantities. With the hot plug-in characteristic of CF card, it can be used in data acquisition and storage of instruments to replace the portable floppy disk or USB storage disk.
- Standard IDE Interface, CF Card Extension Supporting IDE Interface
- Support all CF cards on the market
- Seat/Mother Support can be plugged directly into the motherboard or connected to the hard disk line.
- Multilayer board design conforming to industrial standards, strong EMI resistance
- Common CompactFlash cards with support capacity of 24M, 32M, 48M, 64M, 80M, 96M, 128M, 192M, 256M, 288M, 320M, 352M, 384M, 432, 480, 512M, 592M, 640M, 720M, 840M, 1G, 2G858;4;4G
- Operating temperature: 0-60 degrees C, -25C-70 degrees C, -40 degrees C - +85 degrees C
- Support master-slave jumper, can set master-slave disk.
Performance characteristics:
- Standard IDE interface: true-IDE mode;
- Support CF-I and CF-II cards;
- The IDE interface is 40 feet/2.5mm bus connector, which inserts the card directly into the IDE socket.
- Master/slave jumper settings: can be configured as master or slave;
- Use CF card as DOM: power supply from external floppy drive power base;
Main uses:
- Computer peripheral equipment manufacturers use CF to IDE card with CF card to test motherboard, sound card, graphics card and other products. In these situations, the power supply needs to be switched on and off frequently, and the traditional mechanical hard disk is easy to be damaged. CF card is an electronic hard disk, which is different from mechanical hard disk in principle and is not easy to be damaged in these situations.
- Portable instruments using embedded X86 or RISC kernels usually have IDE interface. If the CF card can not be directly connected to these instruments, you can use this adapter to complete the transfer.
- Personal Computer (PC): These computers are usually X86 cores, which is the main platform for the card. Some digital cameras have CF card interface, you can access your picture data on the desktop through this card.
- Industrial PC uses the combination of this card and CF card to store embedded operating systems such as embedded LINUX or WIN CE. You can also use CF as a mobile hard disk, so that data can be moved at will.
Packaging includes:1pc
On 8-Nov-2022 at 20:53:16 EST, seller added the following information: